Saturday, September 20, 2008

Epson Photo 1390 Adjustment Program

Here is the link for the properly labeled Epson Photo 1390. Just a correction to the file labeled CX1390.

Epson Photo 1390 Adjustment Program

Epson C92/Photo R220/R230 Adjustment Program

Epson C92 Adjustment Program

Epson Photo R220/R230 Adjustment Program with indoreset.bat

Good luck to those who need these reseters!

Happy reseting to everyone.

HP 9000 Printers

  1. Turn the printer off
  2. Press and hold the
  3. CHECK key
  4. Power on the printer
  5. Release the
  6. CHECK key after all three lights come on The display should read SELECT LANGUAGE
  7. Press the up arrow until
  8. MAINTENANCE KIT is displayed, then press the CHECK key again and the maintenance kit count has been reset

HP 8000/8100/8150 Printers

  • Press the
  • MENU button until the display reads CONFIGURATION MENU
  • Press the
  • ITEM button until the display reads SERVICE MESSAGE = ON/OFF
  • Select
  • OFF*
  • Press
  • SELECT to save
  • Turn printer off
  • Hold the
  • VALUE MINUS and ITEM MINUS buttons while turning the printer back on Hold buttons down until display reads RESET MAINT/COUNTand

    HP 4500/4550 Printers

    1. Turn the printer off
    2. Hold down the
    3. CANCEL JOB and SELECT keys and turn the printer on, then wait until the display goes blank and the three LED's come on
    4. Press the right side of the
    5. MENU key, then press the SELECT key
    6. You will enter
    7. SERVICE MODE after the normal test completes
    8. Press the
    9. ITEM key until the FUSER MAINTENANCE COUNT appears
    10. Press
    11. VALUE +/- to change to zero
    12. Press
    13. SELECT to save
    14. Press
    15. GO; the printer should return to READY

    HP 4000/4050/4100/5000 Printers:

    1. Turn the printer off
    2. Hold down the left side of the
    3. ITEM and VALUE +/- keys, turn the printer on and wait
      RESET MAINTENANCE COUNT is displayed and then release the keys

    HP IIISi Printers:

    1. Press
    2. ONLINE until the light goes off
    3. Hold down
    4. MENU until PCL CONFIG MENU appears
    5. Press the
    6. MENU key until SERVICE MSG=ON* appears
    7. Press the
    8. + or - key to change display to SERVICE MSG=OFF
    9. Press
    10. ENTER/RESET MENU key to turn message off, the * should appear, then press ONLINE